Made from food-grade environmentally friendly PP material using a one-piece injection molding process, this product boasts high rigidity, high toughness, impact resistance, and resistance to high and low temperatures. It is formaldehyde-free and free of heavy metals.

Surface: Arched support grid structure provides excellent load-bearing capacity and evenly distributes stress.
Interlocking: Four-sided interlocking installation adapts to thermal expansion and contraction, preventing arching and disengagement.
Bottom: Dense support feet/grid/perforation for ventilation and drainage, reducing weight while increasing pressure resistance.
Customization: Customizable patterns, colors, and logos are available.

Load Capacity: Can withstand long-term parking of large, medium, and small vehicles.

Advantages:
Extremely Fast Installation: After leveling existing cement/epoxy flooring, it is assembled entirely by hand, requiring no professional workers and completed on the same day.

Preservation of Original Floor: Does not damage the base layer, facilitating rental/renovation.

Partial Replacement Available: Damaged individual sections can be replaced individually, minimizing repair costs.

Moisture-proof and Ventilated: The raised floor isolates underground moisture, preventing rust from vehicle chassis.

Installation and Usage Requirements: Ground flatness (difference ≤ 3mm with a 2m straightedge); Pads are required for long-term heavy-load points (such as jack supports);

Applicable Scenarios:

Residential garages, commercial parking lots, repair garages, car washes, etc.

Installation Steps:

Clean the substrate: Remove oil stains, dust, and protrusions; repair cracks;
Level the surface (use self-leveling compound if necessary);
Leave expansion joints (≥ 8~10mm along the wall, for large areas, divide into sections);
Start from the corner baseline, splice row by row, and finally trim the edges and install finishing strips;
No glue or nails required, the locking system automatically engages.