Handball Court Multi Sports Indoor Floor

Short Description:

Product Model:1301G
Handball court flooring texture: Gem pattern
Product specification: 1.8 can be cut
Front/back color: any color
Back pattern options: hexagonal, grid, herringbone convex back, herringbone concave back.
Front pattern: embossed, paper pattern
Product thickness: 3.5-12 mm; outdoor 4.5-6.0 mm available

 


Product Detail

Product Tags

Product Model:1301G
Handball court flooring texture: Gem pattern
Product specification: 1.8 can be cut
Front/back color: any color
Back pattern options: hexagonal, grid, herringbone convex back, herringbone concave back.
Front pattern: embossed, paper pattern
Product thickness: 3.5-12 mm; outdoor 4.5-6.0 mm available

 

According to the International Handball Federation (IHF) and Olympic standards, handball courts are divided into playing area and safety area, Handball court size requirements are listed below.

Competition area: 40 meters (length) x 20 meters (width), error margin ±0.5%.
Total area: 1056 square meters
Barrier-free area: 2m
Lighting standard: ≥1600 lux

Safety buffer zone:
≥2m outside the goal line, ≥1m outside the sideline (≥2m required for international tournaments)
Net ceiling height ≥9 meters (IHF tournament level venues require ≥12.5 meters) 10.

Goal specifications: 2 meters high x 3 meters wide, goal post diameter ≤ 8 cm, net depth 1.5-2 meters.

Marking line width:
Goal line: 8 cm (compare with other side lines 5 cm).
7m line, any ball line: both 5cm wide, use contrasting color with the field (usually white/yellow).

handball court diagram:

Professional handball floor of the 4 major points of purchase

① Certification and test report
Require suppliers to provide IHF certification number and third-party laboratory reports (rebound rate, coefficient of friction).
Verify environmental standards: FloorScore™ (VOC<0.5mg/m³), ISO 1400110.

② Surface Texture Design
Rhombic anti-slip texture: improves emergency stop stability (dynamic coefficient of friction 0.52).
Matte finish: reduces light reflection by 30%, suitable for 500-1500 lux race lighting10.

③ Structural layering technology
Race-grade structure:
Surface layer: 2mm wear-resistant PVC (anti-scratch, anti-fading).
Middle layer: 3mm high-density foam layer (impact absorption ≥ 58%).
Bottom layer: 1.5mm glass fiber reinforced layer (moisture and deformation resistant).

④ Customized service
Marking line pre-printing: laser positioning 7m line/any ball line, error ≤1mm.
Color scheme: support Pantone color card customization, match team LOGO.


  • Previous:
  • Next:

  • Write your message here and send it to us